Re: TrippLite UPS SNMP MIB
I realize this is an old post. We have several TrippLite UPSs and are using these pollers. (Thanks grantsewell !) I've also found and added the following poller but it doesn't seem to be supported...
View ArticleClik here to view.
Re: Cisco UCS server blades not showing Hardware Health of Servers option in...
Hardware Health of Cisco UCS Blade Chassis is a function of NPM, not SAM. To enable UCS monitoring check "UCS manager credentials" under "Additional Monitoring Options" when adding the node as pictured...
View ArticleRe: Cisco UCS server blades not showing Hardware Health of Servers option in...
i was unsure of SAM/NPM but have both here- I have added the fabric interconnects using the ucs manager creds and that's working great.except that upon adding the blades for monitoring I am not seeing...
View ArticleRe: SolarWinds NCM v7.2 is Now Available!
So has anyone had any issues with installing 7.2? We have NPM and NCM on the one server, and I am looking at upgrading to 10.5 for NPM and 7.2 NCM. With the initial issues seen with 10.5 NPM I am...
View ArticleipMonitor v9 and Windows Server 2008R2
Hi, We are currently running ipMonitor v9 on a Windows Server 2003R2 box which we need to replace and upgrade to a Windows Server 2008R2 box.Can I run ipMonitor v9 on a Windows Server 2008R2 x64...
View ArticleRe: querying past alerts
Chris, historical data is stored in alert_recs table, alert details (i.e. name, owner, etc.) are in workspace_file table. The command may look like this: select date_trunc('day', a.time_stamp),...
View ArticleAny way to create a report that will pull me up a list of interfaces that are...
We have a case where we are experiencing asymmetric routing over some of our routers, there is some receive traffic coming down our DSL back up lines. We have a very large estate and I need to weed out...
View ArticleClik here to view.
Re: NCM is seeing date change as a change Cisco Nexus 5548
Hi mmedwid, All you need to do is tell NCM to ignore the lines beginning with !Time, adding the details below to your comparison criteria should sort it: Regards,John
View ArticleClik here to view.
Report hosts intermittently
I'm trying to do a report just like this (in Report writer)(Hosts com intermitência-Ultimas 12 horas) right This report has:NameEvent time - Event type - and a message about the event (packs lost, if...
View ArticleDo you prefer agentless or agent-based monitoring? Are there situations where...
When I’m evaluating a monitoring system, one of the first things I check for is if it is agent-based or agentless. The use of one method over another doesn’t necessarily spell disaster for the project...
View ArticleRe: Any way to create a report that will pull me up a list of interfaces that...
HAve you tried an interface report with received traffic today (assuming daily vs real-time will better find your culprits) and include in the filter section the same line but in a complex statement of...
View ArticleRe: Do you prefer agentless or agent-based monitoring? Are there situations...
we have been slowly moving off Symantec/Altiris client/server mgmt which is a good agent based solution but whose usability for GUI or reporting customization I found seriously lacking.in evaluating...
View ArticleRe: SolarWinds NCM v7.2 is Now Available!
Rather stay a bit behind the bleeding edge so to speak, after hearing what initially happened with 10.5
View ArticleRe: Device discovery and polling IP address
justa2e2 wrote: Ok...after spending a few hours this morning looking at it I have found that when I test credentials from the manage credentials engineers toolset I don't see any traffic leaving from...
View ArticleClik here to view.
Re: Powershell Monitor Coding Help
There are a couple of things that are wrong here. The first is that the script that you are writing is being executed on the SAM poller server, not directly on the server running XenApp. It may be...
View ArticleRe: Limit emails sent on network outages?
You are probably after dependencies. By defining a group (remote hosts), and making it dependent on a router, SolarWinds will understand that the hosts behind the router are not "down" but are now...
View ArticleRe: Do you prefer agentless or agent-based monitoring? Are there situations...
Yes, the concept of "agentless" is really a misnomer. Everything is agent-based, it's just a matter of if the agent is included in the base OS or not.
View ArticleRe: Do you prefer agentless or agent-based monitoring? Are there situations...
Interesting that you might in some cases use both on the same device. I can see that, actually.
View ArticleRe: Do you prefer agentless or agent-based monitoring? Are there situations...
I would also say that if you have an agent, you should show why that is superior to polling mechanisms leveraging SNMP. Often I don't see a clear advantage to agents except push based network mechanics...
View Article